| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| *Low price and high reliablity *105ºC Ootput capacitor *AC input power suitable for the world *High efficiency and low operation tenperature *Sofft-start current can reduce the AC input impact effecticly *With short-circuit and overload protection *Compact size,light weight *100%full-load bum-in test *Installed with EMI filter, mlnlmum wave | |||||||||
| Specification ModelNo. | S-150-5 | S-150-7.5 | S-150-9 | S-150-12 | S-150-13.5 | S-150-15 | S-150-24 | S-150-27 | S-150-48 |
| DC output voltage | 5V | 7.5V | 9V | 12V | 13.5V | 15V | 24V | 27V | 48V |
| Output voltage range (Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated output current | 30A | 20A | 16.7A | 12.5A | 11.2A | 10A | 6.5A | 5.6A | 3.2A |
| output current range | 0~30A | 0~20A | 0~16.7A | 0~12.5A | 0~11.2A | 0~10A | 0~6.5A | 0~5.6A | 0~3.2A |
| Wave and noise (Note:3) | 150mVp-p | 150mVp-p | 120mVp-p | 120mVp-p | 100mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 75mVp-p |
| Inlet stability (Note:4) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
| Load stability (Note:5) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
| DC output power | 150W | 150W | 150W | 150W | 150W | 150W | 150W | 150W | 150W |
| Efficiency | 80% | 80% | 80% | 83% | 83% | 84% | 85% | 86% | 87% |
| Adjustable range for DC voltage | ±10% | 6~8.3V | 8~10.4V | 10.6~13.2V | 12~15V | 13.5~16.5V | 21~28V | 24~30V | 43~53V |
| AC input voltage range | 85-132VAC/170~264VAC 47~63Hz; 240~370VDC | ||||||||
| output current | 3.2A/115V 1.6A/230V | ||||||||
| Power factor | 30A/115V 60A*230V | ||||||||
| Leakage current | <3.5mA/240VAC | ||||||||
| Overload protection | 105%-150% hiccup mode,auto-recovery | ||||||||
| Over-Voltage protection | 115%-135% rated output voltage | ||||||||
| High-temperature protection | -10ºC~+60ºC,20%~90%RH | ||||||||
| Temperaut re cofficient | ±0.03%/ºC(0~50ºC) | ||||||||
| Setup,rise,hold up time | 100ms,50ms,20ms | ||||||||
| Vibration | 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes | ||||||||
| Withstand voltage | I/P-O/P:3Kv I/P-FG:1.5KV O/P-FG:0.5KV 1minute | ||||||||
| Insulation resistance | I/P-O/P IP/FG OP-FG:500VDC/100MΩ | ||||||||
| Working temperature and humidity | -10ºC~+60ºC,20%~90%RH | ||||||||
| Overall dimension | 199*98*38mm | ||||||||
| Safety Standards | UL1950 TUV EN60950 pproved | ||||||||
| EMC Standards | CISPR22(EN55022),IEC1000-4,2,3,4 IEC1000-3-2Verification | ||||||||
| Weight | 0.7Kgs | ||||||||
| Note: 1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature 2.Error incude the seting error, line stability and load stability 3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bug 4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe 5.Load stability test:the load is from 0% to 100% 6.C3,4 must be knocked down | |||||||||
){kind=link}