| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| *Low price and high reliablity *105ºC Ootput capacitor *AC input power suitable for the world *High efficiency and low operation tenperature *Sofft-start current can reduce the AC input impact effecticly *With short-circuit and overload protection *Compact size,light weight *100%full-load bum-in test *Installed with EMI filter, mlnlmum wave | |||
| Specification ModelNo. | S-800-12 | S-800-24 | S-800-48 |
| DC output voltage | 12V | 24V | 48V |
| Output voltage range (Note:2) | ±1% | ±1% | ±1% |
| Rated output current | 66A | 33A | 16A |
| output current range | 0~66A | 0~33A | 0~16A |
| Wave and noise (Note:3) | 150mVp-p | 240mVp-p | 480mVp-p |
| Inlet stability (Note:4) | ±0.5% | ±0.5% | ±0.5% |
| Load stability (Note:5) | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 800W | 800W | 75W |
| Efficiency | 80% | 86% | 87% |
| Adjustable range for DC voltage | ±10% | ±10% | ±10% |
| AC input voltage range | 190-240VAC/ 47-63Hz 230~240VDC | ||
| output current | 6A/230V | ||
| AC rush current | 75A/230V | ||
| Leakage current | <3.5mA/240VAC | ||
| Overload protection | 105%-150% hiccup mode,auto-recovery | ||
| Over-Voltage protection | 110%-135% rated output voltage | ||
| High-temperature protection | ≥70ºC | ||
| Temperaut re cofficient | ±0.03%/ºC(0~50ºC) | ||
| Setup,rise,hold up time | 1.5ms,50ms,20ms | ||
| Vibration | 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes | ||
| Withstand voltage | I/P-O/P:1.5Kv I/P-FG:1.5KV O/P-FG:0.5KV 1minute | ||
| Insulation resistance | I/P-O/P IP/FG OP-FG:500VDC/100MΩ | ||
| Working temperature and humidity | -10ºC~+60ºC,20%~90%RH | ||
| Overall dimension | 207*132*68 mm | ||
| Safety Standards | MeeUL 950 requirement | ||
| EMC Standards | CISPR22(EN55022),IEC1000-4,2,3,4,5,6,8,11IEC1000-3-2 | ||
| Weight | 2.3Kgs | ||
| Note: 1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature 2.Error incude the seting error, line stability and load stability 3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bug 4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe 5.Load stability test:the load is from 0% to 100% 6.C3,4 must be knocked down | |||
){kind=link}